301 Moved Permanently

Posted April 29, 2016 by Chris

"Sound is a phenomena that is a result of vibration of materials. Sound is characterized as a mechanical wave that carries mechanical energy. For the transmission of this energy between transmitter and receiver, presence of a medium is necessary. The medium can be solids, liquids or gases."

Posted April 24, 2016 by Chris

"The Keyglove is an innovative new way to interact with your technology. A wearable, wireless, open-source input device, the Keyglove provides unprecedented flexibility and convenience for gaming, design, art, music, data entry, device control, 3D object manipulation, and even inexpensive telepresence."

Posted April 12, 2016 by Chris

"1Wamp is a one Watt small guitar amplifier based on a JFET guitar pre-amp, the Big Muff Pi tone control and the LM386 power amplifier. This portable amp is an open hardware project designed by ElectroSmash using only free and open-source tools."

Posted April 5, 2016 by Chris

"This article shows roughly what I’m intending to build and my concept of core functionality. Building the frame/stilts out of Plywood. Starting work on the hands so I can size the forearms and arm frame assembly. Building the Forearm mechanism with opening weapon pod. Working my way up the arm and building the shoulder mechanisms….and more…"

Posted April 1, 2016 by Chris

"When I was measuring out the dimensions of my current home in September 2012, I realized that the main room was 20′ by 32′ and that this would make a nice Tetris playing field if the ceiling were made out of 2′ by 2′ light up tiles. I figured I could use opaque suspended ceiling tiles with a single RGB LED pointing down on to each one. With that thought planted in my head, all I needed was the time to design the electronics and build it."

Posted March 29, 2016 by Chris

"After last week’s Pi Zero mod, I thought I’d try a slightly more useful project. Using an Adafruit OLED display, two push buttons, a wifi dongle and a Pi Zero, I made an internet connected information display. The information could be anything: time and date, weather, social media status, etc … The two push buttons are used to cycle through the data and trigger certain actions."

Posted March 27, 2016 by Chris

"To enable easy documentation of pin assignments, I created a couple of ASCII art arduinos; complete with ports, PWM and coms all marked. Simply paste as a comment into your code and marvel at your new found organisation."

Posted March 21, 2016 by Chris

"Combine an Arduino Uno, an Adafruit Servo Shield, Xbox 360 Controller, and a beat-up 1981 Kenner At-At Walker and the result is the toy I always wanted when I was a kid. If you played with this toy growing up you will probably remember how clumsy it was and difficult to move around."

Posted March 19, 2016 by Chris

"The HPA (Heart Pulse Alarm) is a portable device that measures the pulse rate and the body temperature. If the device receives an up normal heart pulse, it will send a message to paramedics to act quickly."

Posted March 11, 2016 by Chris

"We all are very familiar with Printed Circuit Boards or PCBs as they are easily found in television sets, computers and in every electronic device. PCB is widely accepted and most commonly used in Electronics industry. PCB is very cost effective, it assembles the complex circuits in small space and eliminates the risk of loose connections, it has pre designed copper tracks to connect the components in effective and clean way."