FM Bug Transmitter Mint Box

Jump To:
Assembling The Board
           Using the parts from the schematic and a soldering iron start soldering all the parts to the board. Everything but the antenna and the RF coil for starters.


·All the parts needed for assembling the FM transmitter. Solder them In!


·After you have soldered all the parts except for the RF coil and the Antenna, make the RF coil by wrapping the AWG 22 wire (14cm) around a small #2 screwdriver. The diameter of the coil should be around 5mm.


·Wrap it around the screwdriver loosely first.


·Squeeze the coil close and then solder it into the FM Bug PCB.


·At this point your board should be complete except for the Antenna.



;