Project Info
Author: Chris
Difficulty: Very Difficult
Time Invested: 20 Hours
Prerequisites:
Take a look at the above
articles before continuing
to read this article.
Author: Chris
Difficulty: Very Difficult
Time Invested: 20 Hours
Prerequisites:
Take a look at the above
articles before continuing
to read this article.
In this article, we'll be constructing the Club Jameco Kit: The 8x8x8 LED Cube.. We'll also be providing an informal critique of this kit, giving our readers the chance to peek inside the kit itself and, hopefully, steer clear of the many pitfalls that exist when building a project of this complexity.
8x8x8 LED Cube - Construction
Purpose & Overview Of This Project
The purpose of this project is to build an 8x8x8 LED Cube with the parts included in the Club Jameco: 8x8x8 LED Cube Kit. The end result should look similar to or better than the example LED Cube in their official kit instructions.
The sub-goals of this project are to build the 512 LED cube, to build an Arduino based controller board and to build a nice enclosure that hides the electronics. All-in-all I imagine this project should take a weekend to complete.