how found position in imu

Pyro Tutorial Ideas/Requests
mustafa93
Newbie Pyro
Posts: 1
Joined: Mon Sep 01, 2014 10:04 pm

how found position in imu

Postby mustafa93 » Mon Sep 01, 2014 10:31 pm

Hi Chris......
first of all i thank you for this forum
I have arduimu+v2 and i want to find the position in x,y,z
I search about tutorial for position in imu or any code for arduino+imu or arduimu
But not found
i waiting for your help Chris
thanks

Eng.Mustafa

ThePyroElectro
PyroElectro Admin
Posts: 1181
Joined: Mon Nov 12, 2007 9:24 pm
Location: Earth
Contact:

Re: how found position in imu

Postby ThePyroElectro » Mon Nov 03, 2014 12:22 am

mustafa93 wrote:Hi Chris......
first of all i thank you for this forum
I have arduimu+v2 and i want to find the position in x,y,z
I search about tutorial for position in imu or any code for arduino+imu or arduimu
But not found
i waiting for your help Chris
thanks

Eng.Mustafa


Position with respect to what? An IMU can use logged data points from its sensors to calculate the position it is at from turn-on up until a finite time later...that would be a double integral from the cleaned up accelerometer data.

Attitude position on the other hand is usually a combination of gyroscope/accelerometer/digital compass information and gives you the Roll/Tilt/Pitch/Yaw information through a PI control loop.


Return to “Request-a-Tutorial”

Who is online

Users browsing this forum: No registered users and 0 guests