need help for pyro propeller clock project(programming)

Off-topic Or Otherwise...Say/Ask It Here
sai
Newbie Pyro
Posts: 6
Joined: Wed Jun 06, 2012 9:16 am
Location: india

need help for pyro propeller clock project(programming)

Postby sai » Wed Jun 06, 2012 10:28 am

hi pyro

the pyro propeller clock has amused me a lot.....so i took up the project,and it was fine until i reached the programming part.
when i tried to compile the .c file and to convert it to hex file,they were many errors displayed..
The first thing that comes is
#include <p18f252.h>
#include <delays.h>
#include <timers.h>
#include <capture.h>
the above lines are not found...
can you please tell me a solution (or) can you please send me the .hex files for pyro propeller clock project...to my email digvijsai@gmail.com
really looking forward for your reply thank you
and once again the propeller clock project was superb

ThePyroElectro
PyroElectro Admin
Posts: 1181
Joined: Mon Nov 12, 2007 9:24 pm
Location: Earth
Contact:

Re: need help for pyro propeller clock project(programming)

Postby ThePyroElectro » Wed Jun 06, 2012 3:15 pm

sai wrote:hi pyro

the pyro propeller clock has amused me a lot.....so i took up the project,and it was fine until i reached the programming part.
when i tried to compile the .c file and to convert it to hex file,they were many errors displayed..
The first thing that comes is
#include <p18f252.h>
#include <delays.h>
#include <timers.h>
#include <capture.h>
the above lines are not found...
can you please tell me a solution (or) can you please send me the .hex files for pyro propeller clock project...to my email digvijsai@gmail.com
really looking forward for your reply thank you
and once again the propeller clock project was superb


Hi. I didn't provide a HEX file for this project because there was more than 1 configuration.

Please See Here: http://www.pyroelectro.com/forums/viewtopic.php?f=2&t=409#p1943

sai
Newbie Pyro
Posts: 6
Joined: Wed Jun 06, 2012 9:16 am
Location: india

Re: need help for pyro propeller clock project(programming)

Postby sai » Wed Jun 06, 2012 4:11 pm

ya I have seen that you provided 4 models of display ...but please can you at least send the hex file for any 1 model..sorry for bothering you but this is my humble request :( :(

sai
Newbie Pyro
Posts: 6
Joined: Wed Jun 06, 2012 9:16 am
Location: india

Re: need help for pyro propeller clock project(programming)

Postby sai » Wed Jun 06, 2012 4:48 pm

Ok can you please tell me how to compile the .c file into hex file

ThePyroElectro
PyroElectro Admin
Posts: 1181
Joined: Mon Nov 12, 2007 9:24 pm
Location: Earth
Contact:

Re: need help for pyro propeller clock project(programming)

Postby ThePyroElectro » Wed Jun 06, 2012 8:21 pm

sai wrote:Ok can you please tell me how to compile the .c file into hex file


This tutorial explains using MPLABX + C18 compiler for microchip PIC microcontrollers:

http://www.pyroelectro.com/tutorials/pickit3_mplabx/

This tutorial explains using MPLAB (older version) + C18 compiler for microchip PIC microcontrollers:

http://www.pyroelectro.com/tutorials/pic_microcontroller/index.html

Good luck!

sai
Newbie Pyro
Posts: 6
Joined: Wed Jun 06, 2012 9:16 am
Location: india

Re: need help for pyro propeller clock project(programming)

Postby sai » Sun Jun 10, 2012 7:12 am

hi pyro
I went through the tutorials you prescribed and I tried to compile it but this only 1 error is displayed.
could not find file 'c018.o'.
can you please tell me what to do....
Attachments
Capture.PNG
Capture.PNG (163.69 KiB) Viewed 8745 times


Return to “Put'm Here”

Who is online

Users browsing this forum: No registered users and 1 guest