Mine is Company : MDFLY
Programmer : USB-PIC-ICD2-Debugger-Programmer-w-Programming-Module
Just do a google search you will find it on ebay
I wanted to program 16f877a so i choose programmer device as 16f877a
i connected it.
This is what i get in the output of MPLAB
Code: Select all
Auto-connect not enabled - Not connecting (Try enabling auto-connect on the ICD2 settings pages.)
Connecting to MPLAB ICD 2
...Connected
ICDWarn0030: MPLAB ICD2 is about to download a new operating system. If MPLAB IDE is just starting, it will appear to "hang" at the splash screen. Please be patient. MPLAB IDE will finish it's intialization after the OS is downloaded. (Note: You may wish to select to ignore this warning in the future.)
Downloading Operating System
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
Target Device PIC16F877A found, revision = Rev 0x8
...Reading ICD Product ID
Running ICD Self Test
... Failed Self Test. See ICD2 Settings (status tab) for details.
...Download Operating System Succeeded
Setting Vdd source to MPLAB ICD 2
Target Device PIC16F877A found, revision = Rev 0x8
...Reading ICD Product ID
Running ICD Self Test
... Failed Self Test. See ICD2 Settings (status tab) for details.
MPLAB ICD 2 Ready