Page 1 of 1

Parts Kit???

Posted: Wed Jul 02, 2014 6:56 am
by BigTuna
Hello,

If I already have a breadboard box with a 3.3 volt power supply and a programmable clock, what subset of the parts kit do I need for the class (in addition to the CPLD breakout board)?

Thanks,
BigTuna

Re: Parts Kit???

Posted: Wed Jul 02, 2014 6:49 pm
by ThePyroElectro
BigTuna wrote:Hello,

If I already have a breadboard box with a 3.3 volt power supply and a programmable clock, what subset of the parts kit do I need for the class (in addition to the CPLD breakout board)?

Thanks,
BigTuna


Hi,

Every part in the components kit is used at least once in the course and some parts are used several times.

If you already have a power supply, you would only need 470Ω & 10kΩ resistors, tactile push buttons, LEDs, CD4511BE, 7 segment display, a CPLD (preferrably the breakout board we are using) and an Altera compatible JTAG programmer.

Re: Parts Kit???

Posted: Wed Jul 19, 2017 8:54 am
by wingsio
Your article reflects the issue people are concerned about. The article provides timely information that reflects multi-dimensional views from multiple perspectives. I look forward to reading quality articles that contain timely information from you.
fblogin