Page 1 of 1

LED not blinking

Posted: Sat Jan 14, 2017 2:55 am
by calanita
The LED connected to d13 of the ATMEGA IC does not blink when power is applied to the board. I'm following the schematics in Lesson #2. How can I test to see whether my microcontroller is good or not? I double checked my schematic and everything appears to be hooked up correctly. Also (not surprisingly) the board will not respond when I try to upload my program to it (avrdude error). Thanks in advance for your help.

Re: LED not blinking

Posted: Mon Jan 16, 2017 8:23 pm
by calanita
Never mind, I rebuilt my board and the LED is blinking now as it should upon powering up the microcontroller. I may have had some leads capacitor/resistor shorting together inadertently. :D