CAN A MAX202 REPLACE A MAX233

Off-topic Or Otherwise...Say/Ask It Here
MAC49
Newbie Pyro
Posts: 8
Joined: Thu Apr 07, 2011 2:17 pm

CAN A MAX202 REPLACE A MAX233

Postby MAC49 » Fri Apr 15, 2011 7:07 pm

8) hello everyone can i use a max202 in place of a max233 i would like to use this chip on the 18f452 to talk to a serial port also i have 10uf electrolytic capacitors to use on the max202 are these to large thanks for any help

ThePyroElectro
PyroElectro Admin
Posts: 1181
Joined: Mon Nov 12, 2007 9:24 pm
Location: Earth
Contact:

Postby ThePyroElectro » Fri Apr 15, 2011 7:32 pm

Hi,

The MAX202 will work for RS232 serial communication. Just make sure you wire it up correctly as seen on the datasheet:

Image

Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX200-MAX213.pdf

A +5v input is doubled to +10 by the Max202 for RS232 level outputs.


Return to “Put'm Here”

Who is online

Users browsing this forum: No registered users and 1 guest